Need More Advice?

01283 208891

Used Equipment

Our used listings are often changing. 

If you have a requirement for something and you cannot see it here, please get in touch.

Got something to sell? Give us a call and find out how we can help.

Roodberg 45T Travel Hoist (1997) - £30,000 + VAT

1997 year Roodberg Travel Hoist for sale, located in Northern Ireland.

Fully working condition.

Hoist has a jib/ mast crane on top (1500kg SWL)

4 x winches, sling spacing adjustment.

Manual Controls.

6.2m Inside Width, 7.6M Outside Width

LOLER test until March 2022 (note – new test required after assembly at new site).

Strip Down, transport and Installation service available (extra cost) along with LOLER services.

Also accredited operator training if required.

For more information, photos, and specs, please contact

The Pontoon & Dock Company Ltd - +44 (0)1283 208891 | sales@pontoonanddock.com

Floating Rubber Fenders - £1950 + VAT For Both

We have available 2pcs Pneumatic fenders.

Both in good condition. 100% airtight. 5m long x 2.5m dia.

£1,950.00 for both.

E-Works. Loaded on truck deflated.

 

Available for inspection upon request in NE Scotland.

For more information, photos, and specs, please contact

The Pontoon & Dock Company Ltd - +44 (0)1283 208891 | sales@pontoonanddock.com

HS Marine AT13 LHE1 Telescopic Crane - £11,975 + VAT 

In good running order. Ex small Norwegian Ferry, was replaced for larger cap crane. located in NE Scotland. Any inspection is invited and advised.

We have original working /spec manuals & DoC.

A LOLER is a HSE certificate, this crane came from a Norwegian vessel so HSE rules are not in force.

 

If this crane is to be used again it will require a load test, where a certificate of test and thorough examination of lifting appliances will be issued, you have the Declaration of Conformity and this is the main document required before new certificates are issued.

For more information, photos, and specs, please contact

The Pontoon & Dock Company Ltd - +44 (0)1283 208891 | sales@pontoonanddock.com

Job Lot Galvansied Yacht Cradles - £5600 ono + VAT

Available immediately as a job lot ideally, we have a number of

The Yacht Leg and Cradle Company folding Yacht Cradles, as follows:

All bases measure 3.5m long by 1.36m wide (max).

There are 2 x lengths of legs.

 

Inventory:

Complete cradles with 3m legs – 5 units | Complete cradles with 2m legs – 1 unit

Incomplete cradles with 3m legs – 11 units | Incomplete cradles with 2m legs – 7 units

 

The incomplete cradles are missing Acrow adjusters and the pads – these could be easily purchased/ fabricated. Total of 24 units. The galvanising is in good condition as are the steels (i.e. not bent)

Viewing is welcomed – cradles are located in Wales.

For more information, photos, and specs, please contact

The Pontoon & Dock Company Ltd - +44 (0)1283 208891 | sales@pontoonanddock.com

P&D³ Boat Drive On - SOLD

P&D³ modular boat lift drive on, suitable for boats 5m in length and up to 1000kg in weight. This drive on can be made wider or shorter if needed.

Delivery and install to Scotland, Northern Ireland, Channel Islands or Europe additional on request. Self-install option is available and saves £500.

For more information, photos, and specs, please contact

The Pontoon & Dock Company Ltd - +44 (0)1283 208891 | sales@pontoonanddock.com

Used AirBerth M430 - £11,200 Inc. VAT + Delivery

A rare opportunity to pick up a used AirBerth (2016) M430, available immediately. This AirBerth has seen very little use and is currently being dry stored. New, this AirBerth retails at £22,000 + VAT & Delivery.

The M430 is suitable for boats up to 4.3T and between 6.8m and 10m in length.

 

*Representative image, find out more about AirBerth’s here.

​For more information, photos, and specs, please contact

The Pontoon & Dock Company Ltd - +44 (0)1283 208891 | sales@pontoonanddock.com

NEW AirBerth M320 - £10,000 + VAT & Delivery (Installation Included Mainland UK)

We have TWO brand new AirBerth M320’s available immediately for a special price of £10,000 + VAT & Delivery Each, normally £20,700 + VAT & Delivery. 

The M320 is suitable for boats up to 3.2T and between 4.8m and 7m in length.

Take advantage of this offer with over 25% discount from normal retail price  – Installation to Mainland UK is also included.

​For more information, photos, and specs, please contact

The Pontoon & Dock Company Ltd - +44 (0)1283 208891 | sales@pontoonanddock.com

WISE Handling 20T Travel Hoist - SOLD

Wise 20T boat hoist with Perkins engine, and 3 phase generator running 4 x Demag 420 V twin speed electric chain hoists.

 

-Independent control of each hoist. Cross beam winch.

-Sling position (trolley) adjustment.

-1 Ton jib crane (420V) with independent controls. 8500mm max lift height.

-2-wheel steering, with high driving position. Hydraulic steering and drive (chain).

-Industrial tyres in good condition.

-Pair of lifting (boat) slings.

-Well maintained all-round. In good working order and ready to go to work. Machine age early/mid -1970’s. 

Machine is located in Southampton, UK.  

We can provide a full range of services for this machine including:

Inspection (LOLER and engineering), training and any other boat yard support works.

​For more information and specs, please contact The Pontoon & Dock Company Ltd - +44 (0)1283 208891 or James at Pontoon & Dock Marine Services - 07810 833535 | james.burnell@pontoonanddock.com

Brownell Boat Stands - NEW, Available For Demonstration

We are the UK representatives for Brownell Boat Stands.

www.boatstands.com or ask us for a brochure

If you would like to ‘try before you buy’ then please get in touch.

For more information and specs, please contact The Pontoon & Dock Company Ltd - +44 (0)1283 208891 or James at Pontoon & Dock Marine Services - 07810 833535 | james.burnell@pontoonanddock.com

T-Form Cradles - NEW

12T capacity 

We also sell cradles in other sizes, types and designs – just ask! 

Twin beam or single beam also. 

1 x 12T available immediately. 

We can arrange delivery and assembly if desired. 

For more information and specs, please contact The Pontoon & Dock Company Ltd - +44 (0)1283 208891 or James at Pontoon & Dock Marine Services - 07810 833535 | james.burnell@pontoonanddock.com

Custom Hydraulic Boat Trailer 35T Capacity - £35,000 + VAT

Built in 2014 for the current owners, this slipway trailer has only ever been used in fresh water.

Key dimensions:

Trailer length 38ft (has had 59ft boat on)

Pad heights 28” – 54” (609mm – 1371mm)

Hydraulic variable width and frame adjustment.

Trailer will be repainted prior to ownership change.

Available to buy from the owners for £35,000 ex VAT.

Located in Northern Ireland.

For more information and specs, please contact The Pontoon & Dock Company Ltd - +44 (0)1283 208891 or James at Pontoon & Dock Marine Services - 07810 833535 | james.burnell@pontoonanddock.com

Neptune M250 Negative Lift FLT - £65,000 + VAT & Delivery

Available now in the UK, Very rare opportunity!

2008 Hoist Neptune 155hp machine with 25,000lb/ 11,340kg max capacity.

 

Machine available as new version now in place.

Includes remote control unit to compliment cab controls.

Machine is fully functioning, however could really do with some TLC. Main hoist ram does have a leak.

Lots more photos and video available, viewings welcomed. 

Price reflects works required. Significantly cheaper than newer/ new alternatives.

We can undertake disassembly, transport and reassembly/commissioning if required. We can also refurbish this machine for you if preferred. Also provide accredited and approved training, and supply of boat racks.

For more information and specs, please contact The Pontoon & Dock Company Ltd - +44 (0)1283 208891 or James at Pontoon & Dock Marine Services - 07810 833535 | james.burnell@pontoonanddock.com

12T Galvanised T-Form Cradles - SOLD

This batch is now sold, but please get in touch if you’re looking for cradles.

 

Some built by Knipjstra (Roodberg) and some by Solent Marine.

Mostly complete and ready to go (some minor parts such as odd pads missing).

Viewing welcomed. 

We can arrange disassembly, delivery and reassembly if required. 

Price negotiable for multiples. 

For more information and specs, please contact The Pontoon & Dock Company Ltd - +44 (0)1283 208891 or James at Pontoon & Dock Marine Services - 07810 833535 | james.burnell@pontoonanddock.com

Used Pontoon Sections - SOLD

14 used pontoon sections, these pontoons were built around 6 years ago for the MOD at a cost over 18k each but never used. Made up of two 914 OD tubes, dims 5m x 2.5m x 0.9m weighing 4 tons each.

 

They are currently located in Southampton. Delivery can be arranged at an extra cost.

Price includes £100 cleaning fee. 

For more information and specs, please contact The Pontoon & Dock Company Ltd - +44 (0)1283 208891

1995 JCB Fastrac 155 - SOLD

1995 year JCB Fastrac – Genuine ex-military, very well looked after and low hours for the year! This machine is only for sale as the owners have bought a bigger trailer and needs a bigger tractor. This would be perfectly suited to a hydraulic trailer. This tractor is ready to go. 

  • Perkins 6cyl diesel, 4 X 4, 168HP.

  • Front and rear hitches.

  • Locking diffs.

  • Hydraulics.

  • Power assist steering.

 

For more information and specs, please contact The Pontoon & Dock Company Ltd - +44 (0)1283 208891